for price, delivery and to place orders: hittite microwave corporation, 20 alpha ro ad, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - driver & gain block - smt 8 8 - 122 HMC480ST89 / 480st89e ingap hbt gain block mmic amplifier, dc - 5 ghz v02.0710 general description features functional diagram the HMC480ST89 & HMC480ST89e are ingap hbt gain block mmic smt amplii ers covering dc to 5 ghz and packaged in an industry standard sot89. the amplii er can be used as a cascadable 50 ohm rf/if gain stage as well as a lo or pa driver with up to +20 dbm p1db output power for cellular/3g, fwa, catv, microwave radio and test equipment applications. the HMC480ST89(e) offers 19 db of gain with a +34 dbm output ip3 at 1 ghz while requiring only 82 ma from a single positive supply. the HMC480ST89(e) ingap gain blocks offer excellent output ip3 and l at +19 to +20dbm output power performance through 5 ghz compared to equivalent sige based products. p1db output power: +19 dbm to 2.5 ghz gain: 19 db @ 1 ghz 16 db @ 2 ghz +34 dbm output ip3 single supply: +6v to +8v industry standard sot89 package included in the hmc-dk001 designers kits typical applications the HMC480ST89 / HMC480ST89e is an ideal rf/if gain block & lo or pa driver for: ? cellular / pcs / 3g ? fixed wireless & wlan ? catv, cable modem & dbs ? microwave radio & test equipment electrical specii cations, vs= 8.0 v, rbias= 39 ohm, t a = +25 c note: data taken with broadband bias tee on device output. parameter min. typ. max. units gain dc - 1.0 ghz 1.0 - 2.0 ghz 2.0 - 3.0 ghz3.0 - 4.0 ghz 4.0 - 5.0 ghz 1714 12 10 8 1917 15 13 11 dbdb db db db gain variation over temperature dc - 5 ghz 0.008 0.016 db/ c input return loss dc - 1.0 ghz 1.0 - 5.0 ghz 17 10 dbdb output return loss dc - 1.0 ghz 1.0 - 5.0 ghz 17 10 dbdb reverse isolation dc - 5 ghz 20 db output power for 1 db compression (p1db) 0.5 - 1.0 ghz 1.0 - 2.0 ghz 2.0 - 3.5 ghz3.5 - 5.0 ghz 16 15.5 14.5 13 20 18.5 17.5 16 dbmdbm dbm dbm output third order intercept (ip3) (pout= 0 dbm per tone, 1 mhz spacing) 0.5 - 1.0 ghz 1.0 - 2.0 ghz 2.0 - 3.5 ghz3.5 - 5.0 ghz 3433 32 30 dbmdbm dbm dbm noise figure dc - 4 ghz 4.0 - 5.0 ghz 3.25 4.0 dbdb supply current (icq) 82 ma information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se , no r for any infring em en ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an al og .com app li cation sup po rt: p ho ne: 1-800-analog-d
for price, delivery and to place orders: hittite microwave corporation, 20 alpha ro ad, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - driver & gain block - smt 8 8 - 123 output return loss vs. temperature broadband gain & return los s gain vs. temperature reverse isolation vs. temperature input return loss vs. temperature noise figure vs. temperature -30 -25 -20 -15 -10 -5 0 5 10 15 20 25 012345678 s21 s11 s22 response (db) frequency (gh) 0 2 4 6 8 10 12 14 16 18 20 22 0123456 +25 c +85 c -40 c gain (db) frequency (gh) -25 -20 -15 -10 -5 0 0123456 +25 c +85 c -40 c input return loss (db) frequency (gh) -25 -20 -15 -10 -5 0 0123456 +25 c +85 c -40 c output return loss (db) frequency (gh) -25 -20 -15 -10 -5 0 0123456 +25 c +85 c -40 c reverse isolation (db) frequency (gh) 0 1 2 3 4 5 6 7 8 9 10 012345 +25 c +85 c -40 c noise figure (db) frequency (gh) HMC480ST89 / 480st89e ingap hbt gain block mmic amplifier, dc - 5 ghz v02.0710 information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se , no r for any infring em en ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an al og .com app li cation sup po rt: p ho ne: 1-800-analog-d
for price, delivery and to place orders: hittite microwave corporation, 20 alpha ro ad, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - driver & gain block - smt 8 8 - 124 gain, power & oip3 vs. supply voltage @ 85 0 mhz, rbias= 39 ohms p1db vs. temperature psat vs. temperature output ip3 vs. temperature vcc vs. icc over temperature for fixed vs= 8v, r bias = 39 ohms 4 6 8 10 12 14 16 18 20 22 24 012345 +25 c +85 c -40 c p1db (dbm) frequency (gh) 4 6 8 10 12 14 16 18 20 22 24 012345 +25 c +85 c -40 c psat (dbm) frequency (gh) 20 22 24 26 28 30 32 34 36 38 40 012345 +25 c +85 c -40 c oip3 (dbm) frequency (gh) 0 4 8 12 16 20 24 28 32 36 7.6 8 8.4 gain p1db psat oip3 gain (db), p1db (dbm), psat (dbm), oip3 (dbm ) vs (vdc) 70 72 74 76 78 80 82 84 86 88 90 4.6 4.7 4.8 4.9 5 icc (ma) vcc (vdc) +85 c -40 c +25 c HMC480ST89 / 480st89e ingap hbt gain block mmic amplifier, dc - 5 ghz v02.0710 information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se , no r for any infring em en ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an al og .com app li cation sup po rt: p ho ne: 1-800-analog-d
for price, delivery and to place orders: hittite microwave corporation, 20 alpha ro ad, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - driver & gain block - smt 8 8 - 125 outline drawing absolute maximum ratings collector bias voltage (vcc) +6.0 vdc rf input power (rfin)(vcc = +5 vdc) +11 dbm junction temperature 150 c continuous pdiss (t = 85 c) (derate 8.25 mw/c above 85 c) 0.536 w thermal resistance (junction to ground paddle) 122 c/w storage temperature -65 to +150 c operating temperature -40 to +85 c HMC480ST89 / 480st89e ingap hbt gain block mmic amplifier, dc - 5 ghz v02.0710 part number package body material lead finish msl rating package ma rking [3] HMC480ST89 low stress injection molded plastic sn/pb solder msl1 [1] h480 xxxx HMC480ST89e rohs-compliant low stress injection molded plast ic 100% matte sn msl1 [2] h480 xxxx [1] max peak rel ow temperature of 235 c [2] max peak rel ow temperature of 260 c [3] 4-digit lot number xxxx package information electrostatic sensitive device observe handling precautions notes: 1. package body material: molding compound mp-180s or equivalent. 2. lead material: cu w/ ag spot plating. 3. lead plating: 100% matte tin. 4. dimensions are in inches [millimeters] 5. dimension does not include moldflash of 0.15mm per side. 6. dimension does not include moldflash of 0.25mm per side. 7. all ground leads must be soldered to pcb rf ground. information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se , no r for any infring em en ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an al og .com app li cation sup po rt: p ho ne: 1-800-analog-d
for price, delivery and to place orders: hittite microwave corporation, 20 alpha ro ad, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - driver & gain block - smt 8 8 - 126 application circuit recommended component values for key application frequencies component frequency (mhz) 50 900 1900 2200 2400 3500 5000 l1 270 nh 56 nh 18 nh 18 nh 15 nh 8.2 nh 6.8 nh c1, c2 0.01 f 100 pf 100 pf 100 pf 100 pf 100 pf 100 pf note: 1. external blocking capacitors are required on rfin and rfout. 2. r bias provides dc bias stability over temperature. recommended bias resistor values for icc= 82 ma, rbias= (vs - vcc) / icc supply voltage (vs) 6v 8v r bias v alue 12 39 r bias p ower r ating 1/8 w 1/4 w HMC480ST89 / 480st89e ingap hbt gain block mmic amplifier, dc - 5 ghz v02.0710 pin descriptions pin number function description interface schematic 1r f i n this pin is dc coupled. an off chip dc blocking capacitor is required. 3 rfout rf output and dc bias (vcc) for the output stage. 2, 4 gnd these pins and package bottom must be connected to rf/ dc ground. information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se , no r for any infring em en ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an al og .com app li cation sup po rt: p ho ne: 1-800-analog-d
for price, delivery and to place orders: hittite microwave corporation, 20 alpha ro ad, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - driver & gain block - smt 8 8 - 127 evaluation pcb the circuit board used in the i nal application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and package bottom should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation board should be mounted to an appropriate heat sink. the evaluation circuit board shown is available from hittite upon request. list of materials for evaluation pcb 108371 [1] item description j1 - j2 pcb mount sma connector j3 - j4 dc pin c1, c2 capacitor, 0402 pkg. c3 100 pf capacitor, 0402 pkg. c4 1000 pf capacitor, 0603 pkg. c5 2.2 f capacitor, tantalum r1 resistor, 1210 pkg. l1 inductor, 0603 pkg. u1 HMC480ST89 / HMC480ST89e pcb [2] 108370 evaluation pcb [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350 HMC480ST89 / 480st89e ingap hbt gain block mmic amplifier, dc - 5 ghz v02.0710 information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se , no r for any infring em en ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an al og .com app li cation sup po rt: p ho ne: 1-800-analog-d
|
